| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Engine/Hybrid System | Section: Engine Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002TKY008X |
| Title: 3UR-FE ENGINE CONTROL: KNOCK SENSOR: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL KNOCK CONTROL SENSOR
(a) Install the 4 knock control sensor with the 4 bolts so that the sensors are angled as shown in the illustration.
Torque: 20 N·m (204 kgf·cm, 15 ft·lbf)
NOTICE:
The acceptable installation angle of the sensor is between 10° upward and downward from the horizontal position.
(b) Connect the 4 knock control sensor connectors.
2. INSTALL NO. 1 ENGINE COVER
3. INSTALL NO. 2 CYLINDER HEAD COVER
4. INSTALL INTAKE MANIFOLD
(a) Install the intake manifold
.
|
|